Reset data

QI85

Updating Product Data...

Photometric configuration only available on screens above 1024px

updated

LED
2W 190lm - light source values
2W 144lm - system values i
System flux (lm): total light flux emitted by the product. System power (W): energy consumption of the product, including power components.
Luminous Efficiency (system value): 72lm/W
2700K CRI 90
Optic: M - Medium 24°
Adjustability: fixed
Lm output in Emergency mode: -
Total light flux at or above 90° [Lm]: 0
Light Output Ratio (L.O.R.) [%]: 76
Life Time 1: > 50,000h - L80 - B10 (Ta 25°C)

Installation: The luminaire is recessed in the specific adapter (QJ86) by means of a steel wire spring, previously installed on the ceiling that can be 12,5 / 15 / 20 mm thick. A special protective sheath allows finishing operations on the plasterboard to be simplified and speeded up.
Environment: Indoor
Wiring: Constant current ballasts to be ordered separately: ON-OFF - code no. MXF9 (min 1 / max 8); dimmable DALI - code no. BZM4 (min 2 / max 20) - check the instruction sheet for the lengths and compatible cross-sections of the cables to be used.
This product requires one of the accessories listed below to be installed:
Minimal flange - for false ceilings between 12.5 mm and 20 mm thick - for recessed 22x22 mm QJ86

QJ86

Minimal flange - for false ceilings between 12.5 mm and 20 mm thick - for recessed 22x22 mm
- 01 White
BZM4

Constant current power supply DALI IP20 50W - Vin = 220-240VAC 50/60Hz Iout = 350÷1050 mA

Size (mm): 125x80x22
- 00 Indeterminate
MXF9

Constant current power supply unit non dimmable IP20 20W - VIN = 220-240VAC 50/60Hz Iout=700mA

Size (mm): 110x52x22
- 00 Indeterminate
X090

Constant current power supply unit DALI IP20 20W - Vin = 220-240 Vac 50/60 Hz - I out = 250-700mA

Size (mm): 110x52x22
- 00 Indeterminate

updated

Do you want to know more?

Search