Reset data

QK28

Updating Product Data...

Photometric configuration only available on screens above 1024px

On request. For further details please contact your iGuzzini representative, or send us your enquiry.

updated

LED
25W 3100lm - light source values
28.3W 1643lm - system values i
System flux (lm): total light flux emitted by the product. System power (W): energy consumption of the product, including power components.
Luminous Efficiency (system value): 58lm/W
2700K CRI 90
Optic: WW - Wall Washer
Adjustability: fixed
Lm output in Emergency mode: -
Total light flux at or above 90° [Lm]: 0
Light Output Ratio (L.O.R.) [%]: 53
Life Time 1: > 50,000h - L90 - B10 (Ta 25°C)

Dimmable Electronic Driver included
Control: DALI
N° lamps assembly: 1
Power Factor: See installation instructions
Inrush Current: 10 A / 200 µs
Circuit Braker:
B10A: 18 luminaires
B16A: 30 luminaires
C10A: 31 luminaires
C16A: 51 luminaires
Perc Min Dimmer: 1
Overvoltage Protection: 5kV Common mode & 4kV Differential mode
Dimming Mode: CCR

Installation: The luminaire is recessed in the specific adapter (QK51) by means of a steel wire spring, previously installed on the ceiling that can be between 12.5 and 25 mm thick. To light walls correctly check the installation distances and centre-to-centre distances indicated on the instructions sheet.
Environment: Indoor
Wiring: Quick-coupling connections on the ballast unit. Digital electronic cabling that allows dimming to be performed with DALI protocol or a pushbutton switch (read the indications on the instruction sheet carefully).
This product requires one of the accessories listed below to be installed:
Minimal flange - for false ceilings between 12.5 mm and 25 mm thick - for recessed 207x69 mm QK51

QK51

Minimal flange - for false ceilings between 12.5 mm and 25 mm thick - for recessed 207x69 mm
- 01 White

updated

Do you want to know more?

Search