Reset data

QK40

Updating Product Data...

Photometric configuration only available on screens above 1024px

Select a combination of accessories to download
specific product data sheets and photometric curves.

updated

LED
8.2W 1100lm - light source values
10.5W 660lm - system values i
System flux (lm): total light flux emitted by the product. System power (W): energy consumption of the product, including power components.
Luminous Efficiency (system value): 62lm/W
3000K CRI 90
Optic: M - Medium 24°
Adjustability: directional
Lm output in Emergency mode: -
Total light flux at or above 90° [Lm]: 0
Light Output Ratio (L.O.R.) [%]: 60
Life Time 1: > 50,000h - L90 - B10 (Ta 25°C)

Dimmable Electronic Driver included
Control: DALI-2
N° lamps assembly: 1
Power Factor: See installation instructions
Inrush Current: 16 A / 220 µs
Circuit Braker:
B10A: 15 luminaires
B16A: 24 luminaires
C10A: 24 luminaires
C16A: 40 luminaires
Overvoltage Protection: 2kV Common mode & 1kV Differential mode

Installation: The luminaire is recessed in the specific adapter (QK49) by means of a steel wire spring, previously installed on the ceiling that can be between 12.5 and 25 mm thick. Installation possible in a horizontal or vertical position.
Environment: Indoor
Wiring: Quick-coupling connections on the ballast unit. Digital electronic cabling that allows dimming to be performed with DALI protocol or a pushbutton switch (read the indications on the instruction sheet carefully).
This product requires one of the accessories listed below to be installed:
Minimal flange - for false ceilings between 12.5 mm and 25 mm thick - for recessed 69x69 mm QK49

MW78

Diffuser Filter
- 65 Nitric
MY14

Coloured filters

Size (mm): ø40
- 05 red
- 06 Yellow
- 16 Blue
MY40

Refractor for elliptical distribution
- 24 Clear transparent
MY39

Honeycomb louvre

Size (mm): ø50x3
- 04 Black
MY42

“Soft Lens” filter
- 24 Clear transparent
QK49

Minimal flange - for false ceilings between 12.5 mm and 25 mm thick - for recessed 69x69 mm
- 01 White