S706
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 02/12/2025Description
Wall, ceiling or floor-mounted luminaire; fitted with a 360° Lama optic divided into ten sectors that can be controlled and managed separately. The product consists of an optical assembly and cover made of an aluminium alloy and subjected to a multi-step, pre-treatment process in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The optic screen is made of methacrylate. DMX/RDM electronics are included in the product and distributed between the optical assembly and cover. A standard programme has already been loaded inside the product if the Trick em is not connected to any DMX/RDM control system. The power supply unit is not included and can be ordered as a separate accessory. There are two knockout walls on the cover to facilitate the sideways passage of the cable. Pass-through wiring is included. To install Trick em the body must be combined with one of the three bases supplied as an accessory. All external screws used are made of A2 stainless steel.
Dimensions
Diameter (mm)
ø110
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.77
Material
Aluminium
Product certification
-
BIS -
CE -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
66.64
W system
11.5
lm source
W source
Luminous efficiency - lm/W (system value)
5.79
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
45
Light output ratio (LOR)
100
Optic and beam angle
L360° - 360° light blade effect8
Adjustability
rotation
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 96
Colour temperature
3000 K
MacAdam Step
2
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a 45°C.
ZVEI code
LED
Power Supply
Electronic Power supply not included
Mounting options
Remote
Control
DMX-RDM
LED Current
315
Installation
Description
The luminaire is installed on a wall or ceiling via one of the two bases supplied as an accessory or via the plate that is always supplied as an accessory.;
Mounting
Wall arm, Wall surface, Ceiling surface
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessoriesNotes
The product is compatible with:
• MASTER PRO DMX.
• QUICK DMX.
• Third party DMX/RDM systems.