BP89
couleur
Accessoires optionnels
Données techniques
Dernière mise à jour: 10/01/2026Description
Direct light luminaire, designed to use monochrome LED lamps. Ceiling- and wall-mounted. Consists of a body and supports for installation, to be ordered separately. Extruded aluminium body, with die-cast aluminium end caps complete with silicone seals. Coated with liquid acrylic paint with a high level of weather and UV ray resistance. Lateral control gear box made of PPS (polyphenylene sulfide). The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone. Complete with multi-LED plate in warm White. Fitted with optics with plastic (methacrylate) lens for Wall Grazing Spot lighting. The lateral box is supplied with a double connector, male/female, with 2-pin quick coupling for pass-through wiring and a closing cap on one side. Set up for pass-through earth wiring. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
528x75x66
Performance technique
Complies with EN60598-1 and pertinent regulations
Propriétés physiques
Matériel
Aluminium extrudé
Certification de produit
-
BIS -
CE -
EAC -
QCERT -
CCC Pending
Données photométriques
Détails
lm (appareil)
861,75
W (appareil)
19,9
lm source
1180
W source
18
Efficacité lumineuse (valeur réelle)
43,3
lm en mode d'urgence
-
Intensité maximale
9883
Light output ratio (LOR)
73
Optique et angle de faisceau
WG - Wall Grazing
Adjustability
fixe
Qualité de la couleur de la lumière
CRI (minimum) 80
Température de couleur
2700 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
66,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Données électriques
Operating ambient temperature range
De -30°C à 50°C.
Voltage
100-277 V AC
ZVEI code
LED
Alimentation
Électronique Ballast inclus
Options de montage
Intégré
Installation
Description
Accessories available for installation: ±90° adjustable arms L=138mm (code 5576), arms extendable from 309 to 389mm and adjustable ±90° (code 5577), bracket for wall-mounting L=310mm (code BZI0), brackets for mounting on balustrades L297mm (code 5578), bracket for surface- or ceiling-mounting L=309mm (code 5570). For a more uniform light beam in the initial few metres, an accessory diffusing filter is available (code BZS8).;
Mounting
Surface murale, Surface de plafond
Wiring
The product is supplied with electronic control gear, 220÷240Vac, 50/60Hz contained in the luminaire. Available for electrical connection: IP66 2-pin female connector (X108), IP66 2-pin male connector + closing cap (X109), IP66 2-pin male connector + female connector (X110)
Notes
Product complete with LED lamp.