.jpg)
BQ18
couleur
Composants optionnels
Données techniques
Dernière mise à jour: 18/03/2026Description
Direct light luminaire, designed to use WNC (White 2700K, 4000K, 6000K) LED lamps and DMX512-RDM control with searching and addressing function. Ceiling, wall or support-mounted. Consists of a body and supports for installation, to be ordered separately. Extruded aluminium body, with die-cast aluminium end caps complete with silicone seals. Coated with liquid acrylic paint with a high level of weather and UV ray resistance. Lateral control gear box made of PPS (polyphenylene sulfide). The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone. Complete with multi-led power plate with single 2700K, 4000K and 6000K white LEDs (WNC). Fitted with optics with plastic (methacrylate) lens for Wall Grazing lighting. The lateral box is supplied with a double connector, male/female, with 5-pin quick coupling for pass-through wiring and a closing cap on one side. Set up for pass-through earth wiring. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
1490x75x66
Performance technique
Conforme à la norme EN60598-1 et aux réglementations pertinentes.
Propriétés physiques
Matériel
Aluminium extrudé
Certification de produit
-
BIS -
EAC -
QCERT -
CCC Pending
Données photométriques
Détails
lm (appareil)
2200,6
W (appareil)
49,6
lm source
3620
W source
41
Efficacité lumineuse (valeur réelle)
44,37
lm en mode d'urgence
-
Intensité maximale (cd)
15873
Light output ratio (LOR)
61
Optique et angle de faisceau
WG - Wall Grazing
Adjustability
fixe
Température de couleur
Tunable White K
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
66,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Données électriques
Operating ambient temperature range
De -30°C à 50°C.
Voltage
220 - 240 AC
ZVEI code
LED
Alimentation
Électronique Ballast inclus
Options de montage
Intégré
Dimmable option
Dimmable
Contrôle
DMX-RDM
Installation
Description
The following accessories are available for the installation: adjustable aluminium arms ±90° L=138mm (code 5576), extendable aluminium arms from 309 to 389mm and adjustable ±90° (code 5577), stainless steel adjustable arms ±90° L=138 (code BZX2) stainless steel adjustable arms L=310mm (code BZX3), wall mounting bracket L=670mm (code BZI1) balustrade mounting brackets L=297mm (code 5578), support or ceiling installation bracket L=645mm (code 5571).;
montage
Surface murale, Surface de plafond
Wiring
The product is supplied with electronic control gear, with DMX512-RDM control 220-240Vac, 50/60Hz contained in the luminaire. The following are available for the electrical connection and DMX-RDM control: 5 pole IP66 female connector (X123), 5 pole IP66 male connector + closing cap (X124), male connector + 5 pole IP66 female connector (X125), connectors cap (BZQ7), 5 pole 3 way IP68 linear connector (Y type) (BZN7).
DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)
Notes
Product complete with LED lamp. DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)