.jpg)
BI94
couleur
Composants optionnels
Données techniques
Dernière mise à jour: 01/10/2026Description
Direct light luminaire, designed to use monochrome LED lamps. Ceiling- and wall-mounted. Consists of a body and supports for installation, to be ordered separately. Extruded aluminium body, with die-cast aluminium end caps complete with silicone seals. Coated with liquid acrylic paint with a high level of weather and UV ray resistance. Lateral control gear box made of PPS (polyphenylene sulfide). The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone. Complete with multi-LED plate in Warm White. Fitted with optics with plastic (methacrylate) lens for Wall Grazing Spot lighting. The lateral box is supplied with a double connector, male/female, with 2-pin quick coupling for pass-through wiring and a closing cap on one side. Set up for pass-through earth wiring. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
528x75x66
Performance technique
Conforme à la norme EN60598-1 et aux réglementations pertinentes.
Propriétés physiques
Matériel
Aluminium extrudé
Certifications produit
View certification countries-
BIS -
EAC -
Retilap -
TISI -
CCC Pending
Données photométriques
Détails
lm (appareil)
1042.86
W (appareil)
19.9
lm source
1400
W source
18
Efficacité lumineuse (valeur réelle)
52.41
lm en mode d'urgence
-
Intensité maximale (cd)
34082
Flux total émis au-dessus d'un angle de 90° (lm)
0
Light output ratio (LOR)
74
Optique et angle de faisceau
WGS - Wall Grazing Spot
Adjustability
fixe
Température de couleur
3000 K
MacAdam Step
3
Lifetime LED 1
>100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
66000h - L80 - B10 (Ta 40°C)
Graphiques et courbes polaires
Données électriques
Plage de température ambiante de fonctionnement (°C)
De -20°C à +35°C. (*)
Tension d'alimentation
100-277 V AC
ZVEI code
LED
Alimentation
Électronique Ballast inclus
Options de montage
Intégré
Installation
Description
Accessories available for installation: ±90° adjustable arms L=138mm (code 5576), arms extendable from 309 to 389mm and adjustable ±90° (code 5577), bracket for wall-mounting L=310mm (code BZI0), brackets for mounting on balustrades L297mm (code 5578), bracket for surface- or ceiling-mounting L=309mm (code 5570). For a more uniform light beam in the initial few metres, an accessory diffusing filter is available (code BZS8).
Montage
Surface murale, Surface de plafond
Câblage
The product is supplied with electronic control gear, 220÷240Vac, 50/60Hz contained in the luminaire. Available for electrical connection: IP66 2-pin female connector (X108), IP66 2-pin male connector + closing cap (X109), IP66 2-pin male connector + female connector (X110)
Notes
Product complete with LED lamp.