PD41
Colour
Technical Data
last update: 18/12/2025Description
Electronic non-dimmable power supply with constant current from 5.5 to 22W. Input Vin=220÷240 Vac 50÷60 Hz. Constant current output 125÷500 mA selectable with a DIP-SWITCH. Product features include overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
147x44x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Product certification
-
EAC -
ENEC pending
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
Overvoltage protection
4kV Common mode & 2kV Differential mode
Inrush current
5 A / 50 µs
Frequency
50/60 Hz
Installation
Description
Positioned on top of or inside electrical boxes. Fitted with slots for fastening with screws, if required.;
Wiring
Input and output terminals on opposite sides (cable cross-section up to 1.5 mm2).
Primary and secondary cable clamp for cables with a diameter of min. 3 mm - max. 10 mm.
Primary and secondary cable clamp for cables with a diameter of min. 3 mm - max. 10 mm.
Notes
To set the current and for the minimum and maximum quantities of luminaires that can be connected to this power supply, consult the reference product instruction sheet.
Compatible products
This accessory can be used with the following products