1265

Arm for wall-mounted application of a Platea floodlight. Made of two EN10130 FEP01 Am UNI 5866 sheet steel profiles welded on a reticular reinforcing structure. Provided with side openings with oval shape. A steel grip is fitted along the length of the pole to support the power cable. The optical assembly is fixed to the top of the product by means of two semi-slots located in the wider ends of the arms that are fixed to the floodlight with two M10 screws covered by plastic circular caps. The two sheet steel profiles are provided with a die-cast aluminium flange with flat base, fixed in four locations by M10 hexagonal screws. The system is fixed to the pole is by means of no. 2 M10 fischer screws, inserted in the front of the flange. The passage of the power supply cable is at the installer's discretion. Stainless steel screws. Structure made of sheet steel, fully 70 micron hot galvanised.

Wall installation by means of M10 fischer screws.;

The technical characteristics given refer to the product with the floodlight.