2520

Cylindrical pole made of 70 micron hot galvanised steel, in compliance with UNI EN ISO 1461 (EN 40-5), subsequently surface treated with textured acrylic powder paint (grey). In the upper part there are 4 M8 threaded inserts for fixing the product. The pole consists of a single welded tube with at the top end a cylindrical end part ø102mm L=106mm; it is made of EN10025-S355JR steel, with diameter 120 mm, thickness 3 mm and height 8000 mm (7000 mm above ground level). The slot for the access cover measures 410x95 mm, at a height of 1000 mm from the ground, suitable for fitting the terminal block with two fuses (code 1863). Cast aluminium flush access cover. Comes with the relative large triangular key (9 mm key side) for access covers (code 0246). Closing is guaranteed by a non-ageing seal which adapts to pole surface irregularities. The access cover is mounted using a fixing plate, spot welded to the inside of the pole. A metal hook for supporting the terminal block is welded inside the pole. It consists of a metal rod, with 4 mm diameter, bent twice, with dimensions 40x26 mm

The pole is for burial, with the part below ground measuring 1000 mm. For pole protection, a corrosion-resistant protective sheath can be applied to the area of the pole in contact with the ground. The sheath is not included with the pole accessories. Upon request, a pole base plate can be used (code 1850), consisting of two parts which can be joined together, made of cast aluminium, with diameter 420 mm and height 122 mm.;