345D

Stand Alone suspension luminaire with integrated DALI-2 lux/motion sensor. The product consists of an extruded aluminium profile with die-cast zinc end caps. 3500K CRI90 LED board with direct (Down) and indirect (Up) emission. Low Output (LO) version with controlled luminance emission (L≤3000cd/m²) suitable for environments with video terminals (UGR<19). Space Opti-Diamond optic available in versions with either a White Cover (Transparent White) or Black Cover (Transparent Black). The optical and structural equipment of the module allows to obtain high values of flux and system efficiency. The indirect (Up) emission is achieved through a white painted extruded aluminium support plate for greater luminous efficiency. Transparent PMMA raster with black or white PP back cover depending on the version. Suspension and power cables L=1500. For motion and/or daylight-based control, the device must be connected to a DALI-2 system/application controller and programmed for this purpose. Contact iGuzzini for systems compatible with the integrated DALI-2 sensor.

Minimum mounting height 2.4 m / max 4 m for motion and max 3 m as lux + motion sensor. Refer to the instruction sheet for permitted positions. Example diameter of the motion coverage area: 4.3 m @ h2.4 m installation.;

Integrated sensor specifications: -Power is supplied through the DALI line of the iN60 Evo (9 mA absorption). -Illuminance dynamic range: 1 - 2000 lx. -Motion detection angle 84°. -Detection angle for light measurement 30° - 60° (asymmetric). Supplied with accessory shutter that prevents detection from a specific direction, which can be installed if necessary. DALI EN 62386-101 ed.2. The sensor used is certified DALI-2 parts 101, 103, 301, 303, 304. Occupancy sensor DALI part 303: instance 0 Light sensor DALI part 304: instance 1