405E
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 02/12/2025Description
Direct light fixture designed for the use of monochromatic LED light sources. Consisting of optical compartment and outgoing cable. The optical compartment and the glass holder frame are made of die-cast aluminum. The transparent tempered soda-lime closing glass has a thickness of 5mm with black screen printing. The optical compartment is made of EN1706AC 46100LF aluminum alloy, subjected to a multi-step pre-treatment process in which the main phases are: degreasing, fluorozirconation (surface protective layer) and sealing (nano-structured silane layer). The painting phase is carried out with primer and textured acrylic paint, baked at 150 °C, which provides high resistance to atmospheric agents and UV rays. The electronic power supply integrated inside the product is equipped with the DALI-2 protocol. Complete with Warm White monochromatic LED circuit with Black ST1.5 version Optismart optics. The pre-wired product is supplied with an outgoing cable of L=150mm. The IP68 connector can be purchased separately as an accessory. All external screws are made of stainless steel.
Dimensions
General (mm)
271x126
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
1730
W system
20.6
lm source
W source
Luminous efficiency - lm/W (system value)
83.98
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
ST1.5 - residential streets and bicycle lanes - I = 4h d = 1.5 - Intensity Class: G*3 (Lens)
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 97
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C. (*)
Minimum dimming
1
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
DALI-2
Installation
Description
The optical compartment can be installed on the pole with a height of H=2.5m (art. XB17) to be purchased separately. The pole is installed using anchor bolts (on paving) or by means of a fixing base and counter plate with Dakromet-coated anchors, as a further guarantee against corrosion (can be ordered separately).;
Mounting
Pole-top
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessoriesNotes
Surge protection: 4kV Common Mode (CM), 2kV Differential Mode (DM). With the use of the SPD accessory (JAL6), the surge protection increases to 6kV/10kV (CM/DM).