5959

Made of structural steel Fe360 B UNI 7810 and 70-micron hot-galvanised and soldered hot-rolled plates in Fe430 B UNI 7810 steel. The structure is fixed to the pole by means of two flanges inclined by 15° with respect to the horizontal plane and the upper part is supported by 4 stainless-steel tie-rods that are fixed to the pole by means of two more flanges. The tie-rods are needed to hold the structure and projectors mechanically. The aluminium die-cast flanges are treated by a phosphochromatisation process. No holes in the poles need to be made for fixing the structure. Installation is guaranteed by stainless-steel nuts, bolts and screws (M10 for the lower flanges and M8 for the higher flanges). Each flange has hexagonal seats for nut antirotation. The back of the structure is equipped with guiding rings for the power supply cable. Projectors can be adjusted with respect to the longitudinal plane (+50°/-20°) of the frame (or structure). The projectors can also be installed and directed upwards. Application only on cylindrical poles with a diameter of ø=120 mm. Surface treatment by texturised powder painting.

Application on ø=120-mm cylindrical pole by means of 4 M10x45-mm screws (lower flanges), 4 M8x45-mm screws (higher flanges) and 8 stainless-steel self-blocking nuts.;