5984

It is made of bent 70-micron hot galvanised sheet steel type EN10130 FEP01 Am UNI 5866. The lower section of the structure is equipped with guides for the power supply cable. The arm is complete with an aluminium cast support and an aluminium die-cast flange treated by a phosphochromatisation process and fixed to the support by socket-head screws M10. The arm is anchored to the optical assembly by means of two socket-head screws M10x16 mm fixed to the specific seats at the arm end. The external section has two studs with a graduated scale to aim the projector. The fitting can rotate on the vertical plane by 15° towards the wall and 30° towards the outside. The system is fixed to the wall by means of two through socket-head screws M10x130 mm inserted in the front of the flange. The installer can decide where the power supply cable will pass. Surface treatment of the arm by texturised liquid painting. All nuts and bolts are in stainless steel.

Wall application by fischer screws M10.;

Distance from the wall to Maxiwoody projector centre = 500 mm.