5987

It is made of bent 70-micron hot galvanised sheet steel type EN10130 FEP01 Am UNI 5866. The lower section of the structure is equipped with guides for the power supply cable. It has a back wing with a stainless-steel tie-rod having mechanical and aesthetic functions. The arm is complete with an aluminium die-cast support treated by a phosphochromatisation process and tightened by socket-head screws M10. Perfect water tightness in the point where the power supply cable is inserted is guaranteed by a double cable-clamp PG11. The conical pole needs no holes for fixing thanks to 6 self-blocking bolts that also balance the arm. The arm is anchored to the optical assembly by means of two socket-head screws M10x16 mm fixed to the specific seats at the arm end. The external section has two studs with a graduated scale to aim the projector. The fitting can rotate on the vertical plane by 15° towards the pole and 30° towards the outside. Surface treatment of the arm by texturised liquid painting. All nuts and bolts are in stainless steel.

Fixed to the conical pole by a collar with 6 self-blocking stainless-steel bolts M8x16 mm.;

Distance from pole centre to Maxiwoody projector centre = 1200 mm.