6147
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Direct light luminaire, designed to use Warm White monochrome LED lamps, with Flood optic. Can be installed at ground level, on walls (using screw anchors) and on pole mounting systems. Consists of an optical assembly and bracket. The optical assembly and frame are made of aluminium alloy coated with liquid acrylic paint with a high level of weather and UV ray resistance. The frame is fastened to the optical assembly by captive screws and a stainless steel retaining cable. Slots in the frame allow rainwater drainage. The 4 mm thick tempered sodium-calcium closing glass with customised serigraphy is fitted with a 50-60 Shore A silicone seal. The glass+seal assembly is fixed to the frame using silicone. Complete with 3100K monochrome LEDs with a 24 LED circuit, optics with plastic lens and equipped with electronic ballast. The ballast holding plate is made of metal, whilst the box and rear cover are painted aluminium alloy. Complete with spacers and captive screws. The floodlight can be adjusted ±115° in the vertical plane using a painted steel bracket, with a graduated scale showing 10° steps and mechanical stops to guarantee stable aiming of the beam of light. Horizontal aiming is performed using the holes and slots in the bracket. Access to the optical assembly is simpler thanks to a nickel-plated brass decompression valve which eliminates the product internal vacuum. Set up for pass-through wiring using a double M24x1.5 nickel-plated brass cable gland (suitable for cables with 7-16mm diameter). All external screws used are made of A2 stainless steel and are of the captive type. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Dimensions
Diameter (mm)
ø260
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
2490
W system
29
lm source
3000
W source
24
Luminous efficiency - lm/W (system value)
85.86
lm in emergency mode
-
Light output ratio (LOR)
83
Optic and beam angle
S - Spot 12°
Adjustability
rotation and tilt updown
Light colour quality
CRI (minimum) 80
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
230
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
The luminaire can be installed at ground level or on walls using the supporting bracket fixed with screw anchors (Fisher type or similar). It can also be installed in the Multiwoody and Citywoody pole system.;
Mounting
Wall arm, Wall surface, Ground anchored, Free standing
Wiring
Control gear complete with electronic ballast (90-264Vac 50/60Hz) and quick-coupling terminals.
Notes
Upon request version available with Neutral White 4200K LEDs (code 6146). Accessories available: visor, directional flaps, louvre, protective grille and floor anchor plate.