617E
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 02/12/2025Description
Direct light fixture designed for the use of monochromatic LED light sources. Consisting of optical compartment, pole top and outgoing cable. The optical compartment, the glass holder frame and the pole top are made of die-cast aluminum. The transparent tempered soda-lime closing glass has a thickness of 5mm with black screen printing. The optical compartment, made of EN1706AC 46100LF aluminum alloy, undergoes a multi-step pre-treatment process in which the main phases are: degreasing, fluorozirconation (surface protective layer) and sealing (nano-structured silane layer). The painting phase is carried out with primer and textured acrylic paint, baked at 150 °C, which provides high resistance to atmospheric agents and UV rays. Product equipped with Zhaga 4 Pin Up socket. The electronic power supply programmable via NFC technology must be purchased separately. Complete with Warm White monochromatic LED circuit with Black STWt1 version Optismart optics. The pre-wired product is supplied with an outgoing cable of L=3500mm. The IP68 connector (to be purchased as an accessory) can be purchased separately as an accessory. All external screws used are made of steel. All external screws are made of stainless steel.
Dimensions
General (mm)
351x126
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
3230
W system
29.5
lm source
W source
Luminous efficiency - lm/W (system value)
109.49
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
STWt1 - Street optics for heavy vehicle traffic, urban and suburban areas for wet roads
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 84 - Rg (Gamut Index) 96
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C. (*)
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Power supply included
Mounting options
Integral
LED Current
330
Installation
Description
The optical compartment can be installed on the pole with a height of H=4m (art. XB18) to be purchased separately. The pole is installed using anchor bolts (on paving) or by means of a fixing base and counter plate with Dakromet-coated anchors, as a further guarantee against corrosion (can be ordered separately).;
Mounting
Pole-top
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessoriesNotes
The power supply must be purchased separately.