Region and Language

Product standard

Your language

The North America market website will be available by November 2025. After clicking the 'Update' button, you will be redirected to the legacy version of the website. Le site Web du marché nord-américain sera disponible d'ici novembre 2025. Après avoir cliqué sur le bouton « Mettre à jour », vous serez redirigé vers le legacy version du site Web.
Update Update

720E

Downloads

Colour

Technical Data

last update: 01/12/2025
Description
60 W constant current IP66 electronic power supply, complete with steel plate that allows positioning by hooking inside the Lander H=4m pole. Supply voltage Vin=220÷240 Vac, 50÷60 Hz. High protection against mains overvoltages, short circuit protection, reverse polarity, over-temperature. The power supply is configured by default with a 100%-70% profile. Dimming automatically intervenes approximately 2 hours before the middle of the night-time ignition cycle, reducing the luminous power to 70%. Considering, for example, a night-time ignition cycle from 18:00 to 06:00, the dimming intervention will take place at approximately 22:00. In the event of connection of an external DALI control system, the dimming profile is excluded. The current setting allows the Lander system to work at high ambient temperatures, Ta 40° (life) / Ta 50°C (max). For the connection of the power supply inside the pole, it is necessary to provide the accessory connector to be ordered separately. Class II, differential mode surge protection 10kV.
Dimensions
General (mm) 347x80x39
Technical performance
  • Class II

    Class II

  • Completely protected against penetration of dust, Protected against waves

    Completely protected against penetration of dust, Protected against waves

Complies with EN60598-1 and pertinent regulations

Product certification
  • CCC Pending
    CCC Pending
  • ENEC pending
    ENEC pending

Electrical data

Power Supply Electronic Driver included
Mounting options Integral
Dimmable option Dimmable
Control Midnight preset / DALI

Installation

Description

The plate hooks vertically inside the door of the Lander pole.;
Wiring The power supply is equipped with 3 outgoing cables; input / DALI / output for the LED module. Input and DALI cable, towards the power supply terminal block: L= 400 mm Secondary (LED) cable, towards the accessory connector: L=400 mm. For connections, choose the appropriate connectors and terminal blocks suggested by the lighting system instruction sheet.

Notes

The power supply supports information 251, 252, 253. For any modification of the dimming profile, contact iGuzzini.

Compatible products

This accessory can be used with the following products

Subscribe