721E
Colour
Technical Data
last update: 01/12/2025Description
75 W constant current IP66 electronic power supply, complete with steel plate that allows positioning by hooking inside the Lander H=4m pole.
Supply voltage Vin=220÷240 Vac, 50÷60 Hz.
High protection against mains overvoltages, short circuit protection, reverse polarity, over-temperature.
D4i certified, it allows both power supply and information exchange with the Zhaga controller through the DALI line. The current setting allows the Lander system to work at high ambient temperatures, Ta 25° (life) / Ta 35°C (max).
For the connection of the power supply inside the pole, it is necessary to provide the accessory connector to be ordered separately.
Class I, surge protection: differential mode 6kV, common mode 10kV
Dimensions
General (mm)
347x67x50
Technical performance
Complies with EN60598-1 and pertinent regulations
Product certification
-
CCC Pending -
ENEC pending
Electrical data
Inrush current
2.15 A / - µs
Power Supply
Electronic Driver included
Mounting options
Integral
Dimmable option
Dimmable
Installation
Description
The plate hooks vertically inside the door of the Lander Pole.
Fixing holes for the accessory connector are available on the upper part.;
Wiring
The power supply is equipped with 3 outgoing cables; input / D4ì for Zhaga/ output for the LED module.
Input cable, towards the 230 V power supply terminal block: L= 600 mm
Secondary and control cable, towards the accessory connector: L=250-180 mm.
For connections, choose the appropriate connectors and terminal blocks suggested by the lighting system instruction sheet.
Notes
The power supply supports information 251, 252, 253, verify the compatibility of the Zhaga controller and system for their reading.
Compatible products
This accessory can be used with the following products