771A
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Floodlight designed to use LED lamps and an A60 optic. Consisting of an optical assembly, an arm with a swivel joint and a glass-holding frame in aluminium alloy, subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation and sealing. The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. Transparent, 4mm thick, tempered sodium-calcium closing glass. The gasket is in black silicone. The product includes a Warm White monochrome circuit with a Black Optismart Lens optical system. The electronic DALI-2 power supply is integrated in the product and compatible with remote management systems. The frame includes steel retaining cables. The arm with the swivel joint allows the luminaire to be adjusted vertically by 145° and horizontally by 360°. The product is supplied with a nickel-plated brass cable clamp and an outlet cable L=7m long. All external screws used are made of A2 stainless steel.
Dimensions
General (mm)
270x240
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
3.04
Material
Aluminium
Product certification
-
CE -
UK Conformity Assessed
Photometric data
Details
lm system
4550
W system
42.4
lm source
W source
Luminous efficiency - lm/W (system value)
107.31
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
A60 - Asymmetric h = 7 / d = 2
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 97
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -40°C a 35°C.
Inrush current
21 A / 300 µs
ZVEI code
LED
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
DALI-2
Installation
Description
The product can be floor, wall or ceiling-mounted using an arm with a swivel joint to be mounted using screw anchors for concrete, cement and solid brick. It can also be pole-mounted using a steel flange or on minimum poles connected via a minimal flange using the interface to be purchased separately (code XA15).;
Mounting
Wall arm, Wall surface, Ceiling surface