B186
Colour
Technical Data
last update: 08/11/2025Description
Luminaire recessed into the ground with die-cast aluminium body and outer casing; stainless-steel frame and screws. It is designed to use a red LED for indication and orientation purposes. The outer casing for installation can be ordered separately from the optical assembly. Visual comfort is guaranteed by the perfect uniformity of the white glass. The optical assembly is closed at the top by a hardened sodium-lime transparent glass (thickness 10 mm) and an opaline glass (thickness 2 mm) with silicone gasket compressed by an AISI 304 stainless-steel frame. The lower section houses a decompression box for wiring by two terminal blocks and a stainless-steel cable-clamp PG11. This section is connected to the optical assembly through a nickel-plated brass cable clamp M11x1. This makes it easier to open the upper glass by eliminating negative pressure inside the optical assembly and the pump effect on the supply cable. The body-optical assembly is equipped with a locking system with two stainless-steel captive screws on which two aluminium plates can slide. The locking system ensures positioning and anchoring of the optical assembly to the outer casing. The acrylic painting of the body-optical assembly and outer casing guarantees protection against UV rays and the external environment. The coupling of frame, glass, optical assembly and outer casing guarantees resistance to a load of 5000 kg at a maximum speed of 50 km/h. Glass surface temperature does not exceed 30°C.
Dimensions
Diameter (mm)
ø100
Shape
Round
Recessed hole dimensions (mm)
ø130
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
BIS -
ENEC-03 -
QCERT
Photometric data
Details
lm system
3.09
W system
1
lm source
27
W source
1
Luminous efficiency - lm/W (system value)
3.09
lm in emergency mode
-
Light output ratio (LOR)
11
Optic and beam angle
Adjustability
fixed
Colour temperature
K
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
ZVEI code
LED
Power Supply
Electromagnetic Transformer included
Mounting options
Integral
Installation
Description
Recessed into the ground by means of an outer casing. The upper rim of the installed outer casing should protrude out of the pavement by 1mm MAX. The outer casing has an upper diameter of 124 mm, a lower diameter of 236 mm, and is 118 mm high.;
Mounting
Ground recessed
Wiring
Control gear inside the body of the fitting.
Notes
Available accessories: outer casing, pictograms, suction cup and end cap for the outer casing.