B466
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
External direct-light luminaire to be applied to the ground designed to use metal-halide lamps with symmetrical optic. The product is made up of lamp compartment and body. The cylindrical body is made of extruded aluminium and subject to painting and chromate treatment. It houses three stainless-steel rods fixed to the base that make it highly shock-resistant. The product is anchored to the ground by means of a fixing base made of a corrosion-proof diecast aluminium alloy with low copper content. The polycarbonate diffuser screen is fixed to the component-holding box by a diecast-aluminium internal fixing ring. The sheet-aluminium lamp cover is designed to house accessories. The lid-hinging ring is made of diecast aluminium subject to painting and chromate treatment. The top of the fitting is closed by a diecast-aluminium external lid with bayonet-closing system and fixing bolt. The screw can be removed by a socket-head spanner (special spanner upon request). The superpure-aluminium reflector is fixed to the internal end cap by captive screws. The component-holding compartment is made of diecast aluminium. The temperature of all accessible parts never exceeds 75° C. All external screws are made of stainless steel A2.
Dimensions
Diameter (mm)
ø170
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Extruded aluminium
Product certification
-
CE -
ENEC-03 -
QCERT
Photometric data
Details
lm system
W system
lm source
W source
70
Luminous efficiency - lm/W (system value)
0
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
27
Light output ratio (LOR)
27
Optic and beam angle
360° distribution
Adjustability
fixed
Colour temperature
K
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
230
ZVEI code
HIT-CE
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Application either directly by fisher screws (floor) or by fixing bases and outer casing with Dakromet-coated bars against corrosion (to be ordered separately).;
Mounting
Ground anchored
Wiring
The fitting houses an extractable component-holding plate fixed to the box by captive screws and a fast electrical disconnection system. Electronic control gear. The control-gear box can be equipped with double PG for through wiring upon request. Completing with projecting cable H05RN-F 2x1mm2 L=1800mm.
Notes
BLV "Colorlite TopSpot" can be used for B466.