BA41
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Spotlight designed for Warm White (3000K) LED sources with Spot optic. Composed of optical assembly and component-holding base. The optical assembly, arm, base and frame are made of aluminium alloy and subjected to subjected to phosphochromatisation treatment, double primer, passivation at 120° C. Acrylic liquid paint finish with high resistance to atmospheric agents and UV rays; baking at 150°C. The cover glass is made of sodium-calcium tempered transparent colourless glass with 4 mm thickness and grey customised serifigraphy. It is fixed with captive screws. The silicone gasket is subjected to post-cooling treatment in oven at 200° C. The optical assembly allows for vertical and horizontal orientation, with mechanical locking device to ensure stable aiming; slots on the frame for downflow of rainwater.Spot optics with plastic lenses. Circuit complete with 12 monochromatic Warm White (3000K) LEDs. Complete with terminal for through earthing cable and ready for through wiring by means of two PG11 black polyamide cable clamps suitable for Ø 6,5÷11mm cables. All external screws are made of stainless steel A2. Complete with lamp.
Dimensions
Diameter (mm)
ø140
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
BIS
Photometric data
Details
lm system
1400
W system
13.7
lm source
1750
W source
12
Luminous efficiency - lm/W (system value)
102.19
lm in emergency mode
-
Light output ratio (LOR)
80
Optic and beam angle
S - Spot 10°
Adjustability
directional
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 86 - Rg (Gamut Index) 96
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
The fitting can be installed in pavement, ground, wall and tree branches.;
Mounting
External wall corner, Wall arm, Wall surface, Ground spike, Surface box, Free standing
Wiring
Luminaire provided with built-in electronic control gear (100÷240Vac,50/60Hz, 350mA).
Notes
Complete with lamp. Accessories available: refractor, wall washer screen, spike for ground installation, base for 90° corner installation, support for post mounting and belt for installation on trees.