BB96
Colour
Optional accessories
Technical Data
last update: 07/11/2025Description
Luminaire with direct wall-Grazing emission designed for use with Dali dimmable LED sources. Monochromatic, with plate for 39Wmax 30 Warm White (3100K) LEDs, optic with plastic lenses, SPOT version. Complete with lamp and Dali 48÷56Vdc control board. Electronic ballast to be ordered separately. Extruded aluminium body subjected to phosphochromatisation treatment, double primer, passivation at 120° C, die-cast aluminium end caps with 50/60 Shore A silicone gaskets subjected to post-cooling treatment at 200°C C. Acrylic liquid paint finish with high resistance to atmospheric agents and UV rays; baking at 150°C. The optical assembly is closed with sodium-calcium tempered transparent clear semi-acid finished glass with 4mm thickness fixed with silicone. Alluminium outer casing for installation with technopolymer caps to be ordered separately Ready for through wiring by means of four PG11 nickel-plated brass cable clamps suitable for ø 6.5÷11mm cables contained in two thermoplastic boxs fixed to the optical assembly. All external screws are made of stainless steel A2.
Dimensions
General (mm)
1334x101x117
Shape
Rectangular
Recessed hole dimensions (mm)
1292x73x118
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Extruded aluminium
Product certification
-
BIS -
QCERT
Photometric data
Details
lm system
1742.96
W system
39
lm source
2349
W source
35
Luminous efficiency - lm/W (system value)
44.69
lm in emergency mode
-
Light output ratio (LOR)
74
Optic and beam angle
WG - Wall Grazing
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
3200 K
MacAdam Step
3
Lifetime LED 1
50,000h - L70 - B20 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electronic Electronic control card Power supply included not included
Mounting options
Integral
Control
DALI
Installation
Description
Recessed installation in pavement, wall and ceiling with outer casing to be ordered separately.;
Mounting
Wall recessed, Ceiling recessed, Ground recessed
Wiring
Complete with DALI 48-56Vdc control board. Electronic control gear to be ordered separately (code BZ14 - 100W Vin=100-240Vac Vout=48/56Vdc, code BZ15 - 240W Vin=100-240Vac Vout=48/56Vdc , code BZ16 - 480W Vin=100-240Vac Vout=48/56Vdc).
Notes
Available accessories: microperforated screen, outer casing and safety cables for wall and ceiling installation. Complete with lamp. The electronic board takes one Dali address, absorbs one Dali load and is equipped with DIRECT DIM, which provides the following functions by means of standard button: Soft ON/OFF, dimming, storage of last lux level.