BE67
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Downlighter designed to use fluorescent lamps with fixed Wide-flood optic. Consists of a round optical assembly, frame, lateral component holder box and an outer casing to be ordered separately where necessary. The optical assembly and frame are made of aluminium alloy, coated with liquid acrylic paint with a high level of weather and UV ray resistance. The tempered sodium - calcium sealing glass is transparent, with customised serigraphy on the edge, 5mm thick, joined to the frame with silicone. Reflectors made of 99.96% super-pure aluminium, fixed to the assembly by quick-coupling springs. Fixed optic. Complete with a black-painted aluminium multi-groove ring. The lateral component holder box and top end cap are made of black-painted aluminium alloy, complete with a silicone internal seal to guarantee watertightness. The optical assembly and lateral box are connected by a stainless steel threaded connector with a cable gland rubber gasket for a watertight seal. Set up for pass-through wiring using two M24x1.5 nickel-plated brass cable glands, suitable for cables with diameter 7 - 16mm. Ceiling-mounting system consists of special A2 stainless steel screws complete with black aluminium alloy and plastic coupling supports. The frame and the caps of the lateral component holder box come complete with A2 stainless steel captive screws. There is a single tool (No. 3 Allen key) for opening the frame, the lateral box cap and for the fixing system. The outer casing for concrete ceilings is made of black-painted ready-galvanised sheet aluminium complete with an end cap and threaded bar.
Dimensions
Diameter (mm)
ø228
Recessed hole dimensions (mm)
ø212
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
CE -
ENEC-03 -
QCERT
Photometric data
Details
lm system
W system
lm source
W source
26 - 32
Luminous efficiency - lm/W (system value)
0
lm in emergency mode
-
Light output ratio (LOR)
48
Optic and beam angle
VWF - Very Wide Flood
Adjustability
fixed
Colour temperature
K
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
ZVEI code
TC-TEL
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Recessed in false ceilings 5 - 60mm thick. Hole for preparation of false ceiling ø=212mm.Installed on concrete ceilings using an outer casing, to be ordered separately.;
Mounting
Ceiling surface
Wiring
Luminaire equipped with electronic ballast 220/240V 50/60Hz
Notes
Plastic adapter disk available for flush-mounting the frame on ceilings made of concrete exposed to view (can only be used with the product with aluminium frame, without the stainless cover). Products set up for installation of a stainless steel safety kit L=2000mm.