BH36

Outdoor light fitting with direct light street optic, for power leds. Aluminium die-cast optical assembly, with dual phosporous-chromium plating of the base metal, followed by passivation heat treatment at 120° C, grey RAL 9007 wet painting, curing at 150° C. Orientation, also with gradutate scale, of the inclination in relation to the road surface of ± 20°(in 5° steps) in pole-top installation and +5°/-20° (in 5° steps) in lateral installation. Sodium-calcium sealing glass, 5 mm thick. The glass secured to the frame closes the led assembly that is secured to the components compartment with a hinge and 2 screws. The high IP degree is guaranteed by the 60 Shore silicon gasket between the two parts. Complete with Neutral White monochromatic power leds (4000K), silver aluminium reflectors. Replaceable led unit. Power supply unit connected with fast coupling connectors and removable with clip. Driver with automatic internal temperature control. Driver with 4 operating profiles, 100% fixed profiles with three different levels of output lumen and midnight recognition. Profiles can be selected with micro switches (the software allows for custom operating cycles). 220-240Vac 50/60Hz selv electronic control gear. Replaceable power supply unit. The optical assembly is secured to the applique or pole-top attachment with two fixing screws and two safety bolts facilitate assembly. There is no upper light dispersion in the horizontal position (in compliance with the strictest light pollution standards). All external screws are in stainless steel.

The projector can be installed with pole-top or lateral installation on tapered poles, with die-cast aluminium shim for diameters ø46/60/76mm. From ø60 to ø76mm without using the standard adaptor, from ø46 to ø60mm with the adaptor. Pole installation with two bolts and two nuts for safe blockage.;