BI23
Colour
Technical Data
last update: 21/10/2025Description
Direct light outdoor wall-mounted luminaire, designed to use monochrome neutral white LED lamps, with fixed Flood optic. For wall-mounting with the special arm. Consists of an optical assembly, wall-mounting arm and glass-holding frame. The optical assembly, wall-mounting arm and frame are made of die-cast aluminium alloy coated with liquid acrylic paint with a high level of resistance to weather and UV rays, plus a painted plastic guard for the wall-mounting arm. The 4 mm thick transparent, tempered sodium - calcium glass is joined to the frame with silicone. The internal silicone seals guarantee watertightness. Tool-free quick-coupling closing system between frame, optical assembly and wall-mounting arm. Complete with circuit having monochrome neutral white LEDs and an optic with 99.93% polished super-pure aluminium reflector. Flood (F) emission. A number of accessories are available: refractor for elliptical distribution, prismatic diffusing glass and coloured filters. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Dimensions
Diameter (mm)
ø109
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.74
Material
Die-cast aluminium alloy
Product certification
-
CE -
ENEC-03 -
UK Conformity Assessed
Photometric data
Details
lm system
1318.52
W system
16.8
lm source
1830
W source
12
Luminous efficiency - lm/W (system value)
78.48
lm in emergency mode
-
Light output ratio (LOR)
72
Optic and beam angle
WF - Wide Flood 40°
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 83 - Rg (Gamut Index) 94
Colour temperature
4000 K
MacAdam Step
2
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Inrush current
5 A / 50 µs
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Wall-mounted with down-light emission. Secure using screw anchors for concrete, cement and solid brick.;
Mounting
Wall arm, Wall surface
Wiring
Control gear complete with electronic ballast 120-240V ac 50/60Hz. Polyamide PG11 double cable gland for pass-through wiring, suitable for power cables ø 6.5-11 mm. Three-pin terminal block set up for pass-through earth wire. Cables with quick-coupling terminals connect the terminal block and the control gear.
Notes
Product complete with LED lamp