BJ19
Colour
Optional accessories
Technical Data
last update: 07/11/2025Description
Direct light luminaire, designed to use RGB LED lamps (Red, Green, Blue), 48V dc with Dali control. Ceiling- and wall-mounted. Consists of a body, a box for Dali driver and supports for installation (to be ordered separately). Extruded aluminium body and side box, with zamak die-cast end caps complete with silicone seals. Coated with liquid acrylic paint with a high level of weather and UV ray resistance. The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone. Complete with multi-LED plate with individual LEDs in Red, Green and Blue (RGB), side box with 48V dc Dali electronic driver (ballast to be ordered separately). Side box with double PG13.5 cable gland and outlet cables for pass-through wiring. Fitted with a PMMA diffusing filter and optics with plastic (methacrylate) lens for Wall Grazing lighting. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
1496x91x39
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
2.87
Material
Extruded aluminium
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
1572.35
W system
38.6
lm source
2665
W source
31
Luminous efficiency - lm/W (system value)
40.73
lm in emergency mode
-
Light output ratio (LOR)
59
Optic and beam angle
WG - Wall Grazing
Adjustability
fixed
Colour temperature
RGB K
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
ZVEI code
LED
Power Supply
Electronic control card included
Mounting options
Integral
Control
DALI
Installation
Description
The following accessories are available for installation: adjustable wall-mounted arms in AISI304 stainless steel (L=115mm code BZQ9, 200mm code BZJ9) and a plate for surface- or ceiling-mounting made of anodised aluminium (BZJ7).;
Mounting
Wall surface, Ceiling surface
Wiring
The product is equipped with a nickel-plated brass PG13.5 double cable gland with O5RN-F 2x1,5mm²+3x0,35mm² for pass-through wiring: each cable is set up both for the Dali signal and for 48V dc power supply. Available for electrical connection: IP68 5-pin linear connector (BZS6), cap for IP68 connectors (BZQ7), 48V dc DIN bar electronic ballasts to be ordered separately: 120W (BZ14), 240W (BZ15) and 480W (BZ16).
Notes
Product complete with LED lamp.The electronic board takes three Dali addresses, absorbs one Dali load.