BJ81
Colour
Optional accessories
Technical Data
last update: 08/11/2025Description
Ground and pavement recessed luminaire, designed to use RGB LED indicator lamps with diffusing optic. Ground-/pavement-/wall-recessed using the special outer casing. Consists of a body and outer casing to be ordered separately, having the shape of 1/4 of a circle. The body is made in two parts, in cast aluminium with EN1706AC 44100 KF alloy (equivalent to LM6), coated with liquid acrylic paint featuring high level weather resistance; 8 mm tempered sodium-calcium closing glass, painted white, attached to the upper assembly using silicone. The two parts of the body are fixed to one another with a silicone seal between them using A2 stainless steel screws. RGB version with electronic circuit 24V dc and multichip RGB indicator LEDs. Internal driver dimmable with PWM control can be controlled using Dali (code 9639) external control interface + electronic ballast to be ordered separately. The lower assembly comes complete with a stainless steel PG11 cable gland, multi-core cable L=300mm and IP68 Y connector, suitable for cables with diameter D=8-17mm + terminal block for cables with max. section 1.5mm², complete with closing cap and set up for pass-through wiring. The product and outer casing are secured to one another by two A2 stainless steel captive screws. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Dimensions
General (mm)
307x57x63
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
BIS -
CE -
ENEC-03
Photometric data
Details
lm system
24.29
W system
7
lm source
90
W source
3
Luminous efficiency - lm/W (system value)
3.47
lm in emergency mode
-
Light output ratio (LOR)
27
Optic and beam angle
VWF - Very Wide Flood 118°
Adjustability
fixed
Colour temperature
RGB K
Lifetime LED 1
60,000h - L80 - B20 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
24 DC
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Control
PWM
LED Current
17
Installation
Description
Ground- and pavement-recessed, using the outer casing, to be ordered separately.;
Mounting
Wall recessed, Ceiling recessed, Ground recessed
Wiring
Luminaire equipped with 24V dc electronic circuit, internal driver dimmable with PWM control, can be controlled using Dali (code 9639) external control interface + electronic ballast to be ordered separately. For wiring the product comes with a multi-core cable L=300mm and IP68 Y connector, suitable for cables with diameter D=8-17mm + terminal block for cables with max. section 1.5mm², complete with closing cap and set up for pass-through wiring.
Notes
Product complete with LED lamps. Static load resistance 1500 kg