BL67

Outdoor luminaire with direct light street optic for increased visual comfort (G4), designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Possibility of adjusting, also with a graduated scale, the inclination in relation to the road surface of ± 20°(in 5° steps) in the pole-top installation and +5°/-20° (in 5° steps) in the lateral installation. 5 mm thick tempered sodium-calcium closure glass. The glass secured to the frame closes the led optical assembly which is secured to the components assembly with a hinge and 2 screws. The 60 Shore silicone gasket between the two parts guarantees the high IP67 level. Complete with power monochromatic leds circuit in Neutral White, silver aluminium reflectors. Led assembly (IP67) can be replaced in the field Possibility of replacing the leds in groups of 6/12 in the laboratory. Power supply unit, connected with fast-coupling connectors, can be removed with clip. Driver features an automatic internal temperature control system. Driver with 4 different operating profiles without external controls, profiles (1_2_3) fixed at 100% correspond to three different output lumens and profile (4) with midnight recognition and output lumen referred to profile 1. Profiles selected with micro-switches (custom operating cycles can be set with the specific software). Dali and 0_10V versions on request. Selv 220 - 240V ac 50/60 Hz electronic ballast. Replaceable power supply unit. The optical assembly is fixed to the applique or pole-top attachment with two screws and two safety grub screws facilitate assembly. The light flow emitted in the upper hemisphere of the System in the horizontal position is null (in conformity with the strictest standards for the prevention of light pollution). All external screws used are made of stainless steel.

The floodlight can be installed with pole-top or lateral mounting on tapered poles, using a die-cast aluminium cylinder for diameters of 46/60/76 mm. Diameters from 60 to 76 mm without using the adaptor, from 46 to 60 mm with the adaptor. Secured to the pole by two bolts and two safety locking nuts.;