BP25

Outdoor luminaire with direct light comfort asymmetric optic, designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Adjustment with graduated scale of the inclination in relation to the road surface of + 15°/-5°. 4 mm thick sodium-calcium glass diffuser. Optical assembly and door fixed together by a hinge and two clips, allowing tool-free opening. High level IP66 protection is guaranteed by the 50 Shore black silicone seal interposed between the two elements. Steel door automatic retention system. Optical assembly complete with decompression valve, for easy opening by eliminating the internal vacuum. Complete with power monochromatic leds circuit in Warm White, silver aluminium reflectors. Possibility of replacing the leds in groups of 12 in the laboratory. Power supply unit, connected with fast-coupling connectors, can be removed with clip. Driver features an automatic internal temperature control system. Driver with 4 different operating profiles without external controls, profiles (1_2_3) fixed at 100% correspond to three different output lumens and profile (4) with midnight recognition and output lumen referred to profile 1. Profiles selected with micro-switches (custom operating cycles can be set with the specific software and USB interface). Dali and 0_10V versions on request. Selv 220 - 240V ac 50/60 Hz electronic ballast. Replaceable power supply unit. The optical assembly is fixed to the wall-mounting or pole-top attachment by two fixing screws with Elicel system. Two safety bolts make it easy to fit. The light flow emitted in the upper hemisphere by the projector in the horizontal position is null (in conformity with the strictest standards for the prevention of light pollution). All external screws used are made of stainless steel.

The projector can be installed on the pole (also with arm), with single, double (ø60/ø76/ø102/ø120mm) or triple (ø102/ø120mm) pole-top or wall mounting connector. Installation on a pole may be flush with 6000 mm, 7000 mm or 8000 mm poles (from iGuzzini), or external (with poles not from iGuzzini). Versions with poles for burial and with base plate. Installation on pole with arms, made of hot galvanised steel coated with acrylic liquid paint, using a flange with ø102/ø120 mm (for all poles) or with screws (only for iGuzzini poles).;

Standard EN60598-1 “The luminaire technical characteristics conform to EN60598-1 standards and particular requirements”