BS09
Colour
Optional accessories
Technical Data
last update: 07/11/2025Description
Direct light luminaire, designed to use WNC (White 2700K, 4000K, 6000K) LED lamps and DMX512-RDM control. Ground-, wall- and ceiling-recessed. Consists of a body and outer casing for installation, to be ordered separately. Extruded aluminium body, with die-cast aluminium end caps complete with silicone seals. Coated with liquid acrylic paint with a high level of weather and UV ray resistance. Lower PPS (polyphenylene sulfide) power box. The top of the optical assembly is closed by an 8 mm thick transparent glass screen, fixed with silicone. Complete with multi-LED power plate WNC (White 2700K, 4000K, 6000K) and DMX512-RDM control. Fitted with optics with plastic (methacrylate) lens for Wall Grazing lighting. The lower box has two PG11 nickel-plated brass cable glands and outgoing cables for pass-through wiring. To fix the optical assembly to the outer casing the product has a quick coupling system using an Allen key. Outer casing for installation made of aluminium with technopolymer covers, to be ordered separately. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
1563x101x117
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Extruded aluminium
Product certification
-
BIS -
CE -
QCERT -
CCC Pending
Photometric data
Details
lm system
2200.6
W system
49.6
lm source
3620
W source
41
Luminous efficiency - lm/W (system value)
44.37
lm in emergency mode
-
Light output ratio (LOR)
61
Optic and beam angle
WG - Wall Grazing
Adjustability
fixed
Colour temperature
Tunable White K
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
66,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
220
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Control
DMX-RDM
Installation
Description
Ground- and wall-recessed using the outer casing, to be ordered separately. For ground installation a drainage channel must be created or gravel inserted for drainage under the outer casing before installation, to guarantee the degree of protection stated.
For ceiling-mounting with plasterboard panels (1-30 mm thick), make the preparation openings as indicated in the instructions sheet and use the accessory with code 5926 (kit containing steel cables with reinforcement plates).;
Mounting
Wall recessed, Ceiling recessed, Ground recessed
Wiring
Equipped with electronic control gear with DMX512-RDM control, 220-240V ac, 50/60Hz contained in the luminaire. For electrical connection the product has a lower box with a nickel-plated brass PG11 double cable gland with H07RN-F rubber outgoing cables for pass-through wiring: each cable is set up both for the DMX512-RDM signal and for 220-240V ac power supply. Available for electrical connection: IP68 5-pin linear connector (BZS6), cap for IP68 connectors (BZQ7), IP68 5-pin 3-way (Y-type) linear connector (BZN7).
DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)
Notes
Product complete with LED lamp. The frame, glass, optical assembly and outer casing together guarantee a maximum static load resistance of 1000 kg.
DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)