BU55

Outdoor pendant luminaire with high visual comfort (G4) down light street optic, designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Can be adjusted +/-15° relative to the horizontal axis, and 360° about the vertical axis. 4 mm thick sodium - calcium glass diffuser. Optical assembly and lid fixed together by a hinge and two clips for tool-free opening. High level IP66 protection is guaranteed by the 50 Shore black silicone gasket placed between the two elements. Steel lid automatic retention system. Optical assembly complete with decompression valve, to clear the internal vacuum for easy opening. Complete with circuit having Warm White monochrome LEDs and silver aluminium reflectors. LEDs can be substituted in groups of 12.  Control gear, connected using quick-couplings, can be removed using clips. Driver with automatic inner temperature control system. Driver with 4 different operating profiles, without the aid of external controls, fixed profiles (1_2_3) at 100% corresponding to three different lumen outputs and profile (4) with midnight point recognition and lumen output related to profile 1.  Profiles can be selected using microswitches (operating cycles can be customised using dedicated software and a dedicated USB interface). Dali and 0_10V versions available upon request. Selv 220-240V ac 50/60Hz electronic ballast. Replaceable control gear unit. Die-cast aluminium fixing system with anchoring system to stainless steel wire. Stainless steel anti-fall safety system. There is no light dispersion into the upper hemisphere above this luminaire in the horizontal position (in conformity with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel.

The floodlight can be installed on wires/cables with a diameter of between 6 and 12 mm.;