BV21
Colour
Technical Data
last update: 21/10/2025Description
Outdoor, pole-mounted luminaire with high, visual comfort, downlight and street, comfort optic G6, designed for use with LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. 4 mm thick, transparent, sodium-calcium tempered glass closure, joined to the frame with silicone. The frame is secured to the optical assembly with two AISI 304 stainless steel, captive screws and an AISI 303 stainless steel hinged pin with a 50 Shore silicone gasket between them. The device can be adjusted vertically by +45°/-60° and 337° horizontally with a mechanical locking mechanism for precision aiming. The body and frame include slots for rainwater drainage. The product consists of a die-cast aluminium alloy base fitted with a PG 11, EPDM, double cable gland for pass-through wiring. Patented Optismart optic system, complete with circuit fitted with Warm White monochrome LEDs and silver aluminium reflectors. Replaceable LEDs. DALI electronic control gear. Selv control gear, connected using quick-couplings and removed using clips. Driver with automatic internal temperature control system. Driver with 3 different operating profiles, no external control aids and fixed profiles at 100%, corresponding to three different lumen outputs. Profiles can be selected using microswitches. Replaceable control gear. There is no light dispersion into the upper hemisphere above this luminaire when it is in a horizontal position (in compliance with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel.
Dimensions
General (mm)
270x195x162
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
1380 - 1610 - 1780
W system
16.8 - 19.7 - 22.1
lm source
W source
Luminous efficiency - lm/W (system value)
82.14
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
ST0.8C - I = 3,7h / d = 0,8
Adjustability
directional
Light colour quality
CRI (minimum) 70
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
200 - 240 V AC
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Integral
Dimmable option
Dimmable
Control
DALI
Installation
Description
The floodlight can be installed with a pole-top (single and double) using a die-cast aluminium cylinder. Available diameters: 60 and 76mm. Secured to pole by two bolts and two safety locking nuts.;
Mounting
Wall arm, Wall surface, Ground spike
Wiring
Luminaire with electromagnetic control gear fixed to the body by means of an aluminium plate and connected to the LED circuit with quick-couplings. Resistance to mains voltage peaks of up to 4KV (with varistor).
Notes
Fitting complete with lamp