BV46

Direct light luminaire, designed to use WNC (White 2700K, 4000K, 6000K) LED lamps, a Spot optic and DMX512-RDM control with a searching and addressing function. Can be installed at ground level, on walls (using screw anchors) and on pole mounting systems. Consists of an optical assembly, a frame and bracket. Optical assembly and frame are made of painted, die-cast aluminium. The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The frame is fastened to the optical assembly by captive screws and hinges; the tempered sodium-calcium sealing glass is transparent, with customised serigraphy, 4mm thick, and joined to the outside frame with silicone. A 50-60 Shore A silicone gasket is placed between the glass and product body to guarantee a watertight seal against the penetration of liquids. Complete with multi-led power plate with single 2700K, 4000K and 6000K white LEDs (WNC), a built-in electronic ballast and a DMX512-RDM control card. Fitted with optics with a plastic (methacrylate) lens creating a Spot beam. Anodised aluminium ballast holding plate; extraordinary maintenance is simplified thanks to quick-coupling connectors located between the control gear and LED circuit. The floodlight can be adjusted by ±90° in the vertical plane by means of a painted steel bracket with a 15° step graduated scale, fitted with mechanical blocks that guarantee stable aiming of the beam of light. Horizontal aiming is performed using the holes and slots in the bracket; and pass-through wiring can also be used thanks to the double M24x1.5 nickel-plated brass cable gland (suitable for cables with 7-16mm diameter). Each cable can carry both the DMX signal and the mains power supply. All external screws used are made of A2 stainless steel and are of the captive type. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.

The luminaire can be installed at ground level or on walls using the supporting bracket fixed with screw anchors (Fisher type or similar). It can also be installed in the Platea pole system using the appropriate arms for conical poles.;

Product complete with LED lamp. The DMX specifications require a 120 ohm terminating resistor to be inserted (code no. BZQ7) between the DATA+ and DATA- cables of the last product in the line. If there is no DMX signal, the product performs a dynamic default sequence. Dali versions or DMX512 versions with self-addressing are available on request