BV69
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Direct light luminaire, designed to use single chip RGB LED lamps (Red, Green, Blue), a Flood optic and DMX512-RDM control with searching and addressing function. Installtion in floors, walls and ceilings (with screw anchors). Consists of an optical assembly and a component holder base. Optical asssembly, arm, base and frame are constructed in EN1706AC 46100LF aluminium alloy and painted. The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. The 4 mm thick, tempered, sodium-calcium, closing glass is colourless, transparent and with custom grey silk-screen. It is secured with captive screws. The silicone gasket unergoes a post-cooling treatment, in an oven at 200°. The optical assembly allows vertical and horizontal adjustments, with the possibility of locking the adjustment for aiming, and it has slots in the frame for rainwater drainage. Optics with plastic lenses Flood version. Circuit complete with12 single chip RGB LEDs (n. 4 Red, Green and Blue LEDs) and 48÷52Vdc DMX512-RDM electronic control driver (control gear ordered separetely). The luminaire is complete with two black polyamide PG11 cable clamps, suitable for cables with a diamter between 6.5 and 11mm and it is supplied with two sections of cable 5x L=1100mm for through wiring (to be used for the DMX signal and for the 48Vdc control gear). All external screws used are made of A2 stainless steel. Complete with lamp.
Dimensions
General (mm)
165x165
Diameter (mm)
ø140
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.5
Material
Die-cast aluminium
Product certification
-
BIS -
ENEC-03
Photometric data
Details
lm system
472.5
W system
19
lm source
630
W source
11
Luminous efficiency - lm/W (system value)
24.87
lm in emergency mode
-
Light output ratio (LOR)
75
Optic and beam angle
F - Flood 32°
Adjustability
directional
Colour temperature
RGB K
Lifetime LED 1
50,000h - L80 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electronic Control gear not included
Mounting options
Remote
Dimmable option
Dimmable
Control
DMX
LED Current
350
Installation
Description
The luminaire can be installed in floors, walls and in the ground with screw anchors, in the ground with an accessory peg and on branches with as special accessory.;
Mounting
External wall corner, Internal wall corner, Wall arm, Ground surface, Wall surface, Ground spike, Ceiling surface, Free standing, Pole-top
Wiring
48-52Vdc DMX512-RDM electronic driver. For the electrical connection there are 5-pole IP68 linear connectors (BZS6), a cap for the IP68 (BZQ7) connectors+120 ohm resistance, a 5-pole Y connector for the connection between the DMX signal cable and the power supply cable (BZN7) and DIN 48V dc bar electronic ballasts to be ordered separately: 120W (BZ14), 240W (BZ15) and 480W (BZ16).
Notes
Complete with lamp. DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- terminals of the last product in the line (BZQ7). If there is no DMX signal the product runs the dynamic colour sequence by default. Versions with DALI driver available on request.