BV71

Direct light luminaire, designed to use single chip RGB LED lamps (Red, Green, Blue), a Flood optic and Dali control. Installtion in floors, walls and ceilings (with screw anchors). Consists of an optical assembly and a component holder base. Optical asssembly, arm, base and frame are constructed in EN1706AC 46100LF aluminium alloy and painted. The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. The 4 mm thick, tempered, sodium-calcium, closing glass is colourless, transparent and with custom grey silk-screen. It is secured with captive screws. The silicone seal has been subject to post-cooling treatment, in an oven, at 200°C. The optical assembly allows vertical and horizontal adjustments, with the possibility of locking the adjustment for aiming, and it has slots in the frame for rainwater drainage. Optics with plastic lenses Flood version. Circuit complete with12 single chip RGB LEDs (n. 4 Red Green and Blue LEDs) and 48÷52Vdc DALI electronic control driver (control gear ordered separetely). Product complete with DIRECT DIM RGB used for adjustments with a standard button with the following functions: Soft ON/OFF, chance colour, last colour memory and default dynamic sequence. The device is fitted with two black polyamide PG11 cable gland, suitable for 6.5 to 11mm cables: one PG11 is for the 48Vdc control gear cable and the other PG11 is for the Dali signal cable. All external screws used are made of A2 stainless steel. Complete with lamp.

The luminaire can be installed in floors, walls and in the ground with screw anchors, in the ground with an accessory peg and on branches with as special accessory.;

The electronic driver occupies three Dali addresses and uses one Dali load. Complete with lamp.