BW87
Colour
Optional accessories
Technical Data
last update: 08/11/2025Description
Ground/Pavement-recessed luminaire, designed to use LED lamps. RGB version with 12 multicolour LED circuit, ± 15° adjustable double optic, FLOOD version plastic lenses, and DMX512 electronic control card with self-addressing (48÷52V dc) . Consists of a round body, outer casing and frame. The body is made of cast aluminium, the frame of AISI 304 stainless steel. The optical assembly is closed at the top by 15mm thick tempered glass with a silicone seal, compressed by the AISI 304 stainless steel frame. The lower part contains a decompression box for the wiring, a 7 pole terminal block and a double M24x1.5 stainless steel cable gland, suitable for cables with a 7-16mm diameter. Each cable is set up for both the DMX signal and a 48-52V dc power feed. The wiring assembly is connected to the lamp assembly with an M15x1 nickel-plated brass cable clamp. This device makes it easy to open the upper glass, eliminating the vacuum effect in the optical assembly and the pump effect on the power cable. The optical assembly and body and the outer casing are subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. The optical assembly is positioned and anchored to the outercasing by 2 x M6x25 UNI5931 stainless screws. The outer casing for installation is made of black reinforced polypropylene plastic (to be ordered separately). The frame, glass, optical assembly and outer casing together guarantee a maximum static load of 3,500 kg. All external screws used are made of A2 stainless steel.
Dimensions
Diameter (mm)
ø312
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
BIS -
ENEC-03 -
QCERT
Photometric data
Details
lm system
W system
lm source
271
W source
6
Luminous efficiency - lm/W (system value)
16.78
lm in emergency mode
-
Optic and beam angle
F - Flood 28°
Adjustability
up/down tilt
Colour temperature
RGB K
Electrical data
Operating ambient temperature range
da -20°C a +35°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electronic Control gear not included
Mounting options
Remote
Dimmable option
Dimmable
Control
DMX
Installation
Description
Ground and pavement-recessed using outer casing. The upper edge of the outer casing must not project above ground level (max. 1 mm allowed). Outer casing upper diameter =290mm lower diameter=215mm h=190mm.;
Mounting
Ground recessed
Wiring
DMX electronic driver with self-addressing from 48÷52Vdc. DIN 48V dc bar electronic ballasts to be ordered separately: 120W (BZ14), 240W (BZ15) and 480W (BZ16). For the connection between the DMX signal cable and the power supply cable a Y IP68 connettor is available code no. BZN7.
Notes
Complete with lamp. Outer casing code no. B992 to be ordered separately. DMX specifications require the insertion of a 120 Ohm resistor to be placed between the DATA+ and DATA- terminals of the last product in the line (BZQ7). If there is no DMX signal the product runs the dynamic colour sequence by default. DMX512-RDM versions are available and DALI versions upon request.