BX39

Outdoor luminaire with direct light street optic (ST1.2) for a high level of visual comfort (G4), designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Option of also adjusting, with a graduated scale, the inclination in relation to the road surface of ± 20°(in 5° steps) for a pole-top installation and +5°/-20° (in 5° steps) for a lateral installation. 5 mm thick tempered sodium�calcium closure glass. The glass secured to the frame closes the led optical assembly which is secured to the components assembly with a hinge and 2 screws. The high IP rating is guaranteed by the 60 Shore silicone seal interposed between the two elements. Complete with circuit featuring monochrome LEDs and silver aluminium reflectors. The LED assembly can be replaced directly on the pole. Possibility of replacing the leds in groups of 6/12 in the laboratory. Power supply unit, connected with fast-coupling connectors, can be removed with clip. Driver with automatic internal temperature control system. Driver with 4 different operating profiles without external controls, profiles (1_2_3) fixed at 100% correspond to three different output lumens and profile (4) with midnight recognition and output lumen referred to profile 1. Profiles selected with micro-switches (custom operating cycles can be set with the specific software). Dali and 0_10V versions available upon request. Selv 220-240V ac 50/60Hz electronic ballast. Replaceable control gear. The optical assembly is fixed to the wall-mounted or pole-top attachment with two clamping screws and two safety grub screws facilitate assembly. The light flow emitted in the upper hemisphere of the System in the horizontal position is null (in conformity with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel.

The floodlight can be installed with pole-top or lateral mounting on tapered poles, using a die-cast aluminium cylinder for diameters of 46/60/76 mm. Diameters from 60 to 76 mm without using the adaptor, from 46 to 60 mm with the adaptor. Secured to pole by two bolts and two safety locking nuts.;