EN06
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
IP68 1m permanent immersion linear luminaire – with RGB LEDs – on a 24Vdc flexible white circuit, length L=1004mm. The LED circuit is completely IP68 1m encapsulated with a high-performance polymer sheath that has a white (outside) and milky finish (emission surface): the material allows the device to be installed and used at temperatures: +25°C in water and +45°C in air. Underscore InOut TOP-BEND can be used to create straight lines on flat and curved surfaces. Even, spotfree lighting is guaranteed along the entire strip profile up to the end parts. At one end (not the head), the product is supplied with a single outlet cable L=5000mm. The product is also supplied with stainless steel wires to stop the body from misshaping as this may damage the LED circuit. Easy to install and a robust design for difficult environments (for example, it is salt water, UV and solvent resistant). Minimum curving radius 250mm for 16mm TOP-BEND versions. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
1004x16x20
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.4
Material
High performance polymer
Product certification
-
BIS -
CE -
QCERT
Photometric data
Details
lm system
140
W system
9
lm source
W source
Luminous efficiency - lm/W (system value)
15.56
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
16
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Colour temperature
RGB K
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 45°C.
Voltage
24 DC
ZVEI code
LED
Power Supply
Electronic Control gear not included
Mounting options
Remote
Dimmable option
Dimmable
Control
PWM
LED Current
5
Installation
Description
Surface-mounted (ceiling and wall) using accessories to be ordered separately. The installation accessories available include AISI 316 stainless steel low clips (L=40mm) that are ideal for curved sections.;
Mounting
Wall arm, Wall surface, Ceiling surface
Wiring
24Vdc ±5% LED circuit. Constant voltage ballasts to be ordered separately, both IP20 and IP67 are available and suitable for outdoor installation. DALI 120W 24V dimming interface available (code no. MWP3) or DALI/DMX/1-10V 12-48Vdc 4-channel dimming interface with 6A per channel, (code no. 9639) suitable for both TW LED and white LED versions.
Notes
Product complete with LED lamp. Six standard lengths are available (254-504-1004-2004-3004-7004mm). Immersion installation with clips is not
permitted:
- in areas where direct contact with
people or animals is possible;
- inside swimming pools (allowed only
in surrounding areas);
- on pedestrian or vehicular surfaces.Life Time n.1 Color LED on: 46,000h - L70 - B50 (Ta 25°C)
Life Time n.3 Color LEDs on: 21,000h - L70 - B50 (Ta 25°C)
Life Time n.1 Color LED on: 24,000h - L70 - B50 (Ta 40°C)
Life Time n.3 Color LEDs on: 12,000h - L70 - B50 (Ta 40°C)