MJ25
Colour
Technical Data
last update: 21/10/2025Description
modular pendant system with LED lamps. Module for lighting with controlled glare - High Contrast - specifically for continuous line. Very thin aluminium profile. For serial installation the modules must be completed with the necessary accessory components. Down light emission (approx. 55%) with 3 groups of 5 elements with fixed optic - flood beam angle; the structure of the optical system creates down lighting with controlled glare (UGR < 19) and optimises visual comfort. Up lighting (approx. 45%) with high efficiency LEDs screened by optical diffusers made of ribbed transparent PMMA. Electronic control gear integrated in the luminaire. Possibility of separate switch ons for down / up lighting. Neutral white LED
Dimensions
General (mm)
1278x165x26
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium and thermoplastic
Product certification
-
CE -
ENEC-03
Photometric data
Details
lm system
4005.09
W system
68.01
lm source
4960
W source
54
Luminous efficiency - lm/W (system value)
58.89
lm in emergency mode
-
Light output ratio (LOR)
83
Optic and beam angle
GL - general lighting 48°
Light colour quality
CRI (minimum) 95 - Rf (Colour Fidelity Index) 92 - Rg (Gamut Index) 98
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
50,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
230
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
pendant, in a continuous line. Accessories and components available: linear joint (MX71) for joining adjacent modules, including intermediate suspension cable; pair of end caps (MX70) for start/end of continuous line; base for power cable (max. L 1500 mm) and suspension cable (MX72) with ceiling anchor plate; start/end suspension cable (MX73); the suspension cables are made of steel and include a rapid adjustment system. All ceiling attachments use screws and screw anchors (not supplied);
Mounting
Ceiling pendant
Wiring
the module is fitted with 5-pin terminal blocks for pass-through wiring at the ends; the accessory power base (MX72) has a quick-coupling terminal block for connection to the mains. Product complete with electronic control gear integrated in the module. Possibility of separate switch ons for down / up lighting.
Notes
installation in a continuous line allowed: pendant; use the accessories envisaged. Possibility of creating continuous lines using mixed modules - Low Contrast / High Contrast - however, it is important to consider the different lengths and the specific possibilities for wiring between the various modules