MJ28
Colour
Technical Data
last update: 21/10/2025Description
modular pendant system with LED lamps. Module for lighting with controlled glare - High Contrast - specifically for continuous line. Very thin aluminium profile. For serial installation the modules must be completed with the necessary accessory components. Down light emission (approx. 55%) with 3 groups of 5 elements with fixed optic - flood beam angle; the structure of the optical system creates down lighting with controlled glare (UGR < 19) and optimises visual comfort. Up lighting (approx. 45%) with high efficiency LEDs screened by optical diffusers made of ribbed transparent PMMA. DALI dimmable electronic control gear integrated in the luminaire. Warm white LED
Dimensions
General (mm)
1278x165x26
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium and thermoplastic
Product certification
-
CE -
ENEC-03
Photometric data
Details
lm system
4005.09
W system
68.01
lm source
4960
W source
54
Luminous efficiency - lm/W (system value)
58.89
lm in emergency mode
-
Light output ratio (LOR)
83
Optic and beam angle
GL - general lighting 48°
Light colour quality
CRI (minimum) 90
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
50,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
230
ZVEI code
LED
Power Supply
Control gear included
Mounting options
Integral
Control
DALI
Installation
Description
pendant, in a continuous line. Accessories and components available: linear joint (MX71) for joining adjacent modules, including intermediate suspension cable; pair of end caps (MX70) for start/end of continuous line; base for power cable (max. L 1500 mm) and suspension cable (MX72) with ceiling anchor plate; start/end suspension cable (MX73); the suspension cables are made of steel and include a rapid adjustment system. All ceiling attachments use screws and screw anchors (not supplied);
Mounting
Ceiling pendant
Wiring
the module is fitted with 5-pin terminal blocks for pass-through wiring at the ends; the accessory power base (MX72) has a quick-coupling terminal block for connection to the mains. Product complete with DALI dimmable electronic control gear, integrated in the module. Down light / up light switch on separation: not available.
Notes
installation in a continuous line allowed: pendant; use the accessories envisaged. Possibility of creating continuous lines using mixed modules - Low Contrast / High Contrast - however, it is important to consider the different lengths and the specific possibilities for wiring between the various modules