MJ35
Colour
Technical Data
last update: 21/10/2025Description
modular pendant system with LED lamps. Module for general light (Low Contrast) specifically for continuous line; down light emission (approx. 80%) - up light emission (approx. 20%). Very thin aluminium profile. For serial installation the modules must be completed with the necessary accessory components. PMMA diffuser screen for down light emission; frosted polycarbonate upper screens. A control system, integrated with the DALI dimmable electronic control gear, stabilises current and voltage values, guaranteeing correct LED lamp operation and longer life, also making the light flow emitted very even. Neutral white LED.
Dimensions
General (mm)
1381x165x26
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium and thermoplastic
Product certification
-
CE -
ENEC-03
Photometric data
Details
lm system
3905
W system
46.4
lm source
7100
W source
39.4
Luminous efficiency - lm/W (system value)
84.16
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
587
Light output ratio (LOR)
55
Optic and beam angle
GL - general lighting
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 96
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
> 50,000h - L80 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
230
ZVEI code
LED
Power Supply
Control gear included
Mounting options
Integral
Control
DALI
Installation
Description
pendant, in a continuous line. Accessories and components available: linear joint (MX71) for joining adjacent modules, including intermediate suspension cable; pair of end caps (MX70) for start/end of continuous line; base for power cable (max. L 1500 mm) and suspension cable (MX72) with ceiling anchor plate; start/end suspension cable (MX73); the suspension cables are made of steel and include a rapid adjustment system. All ceiling attachments use screws and screw anchors (not supplied);
Mounting
Ceiling pendant
Wiring
the module is fitted with 5-pin terminal blocks for pass-through wiring at the ends; the accessory power base (MX72) has a quick-coupling terminal block for connection to the mains. Product complete with DALI dimmable electronic control gear, equipped with current stabiliser, integrated in the module. Down light / up light switch on separation: not available.
Notes
installation in a continuous line allowed: pendant; use the accessories envisaged. Possibility of creating continuous lines using mixed modules - Low Contrast / High Contrast - however, it is important to consider the different lengths and the specific possibilities for wiring between the various modules