MXR7

Rigid aluminium profile designed for surface installation and specifically for applying a 6 mm strip with a milky elastomer protective cover. Version with two housings for the strip that runs parallel to the installation surface; this allows slightly raised up-down luminous lines (cornices, frames, path indicators etc) to be applied to walls and ceilings. Accessory end caps with separate code.

Accessory clip fastenings code MXM4, the profile is fixed by pressing it onto the clips previously secured at the distances indicated. The strip connecting cables are fed through specifically designed slots at the ends of the profile. Read the 6 mm Ledstrip instructions sheet carefully.;

End cap kit code MXS3 (2 pcs).