Region and Language

Product standard

Your language

The North America market website will be available by November 2025. After clicking the 'Update' button, you will be redirected to the legacy version of the website. Le site Web du marché nord-américain sera disponible d'ici novembre 2025. Après avoir cliqué sur le bouton « Mettre à jour », vous serez redirigé vers le legacy version du site Web.
Update Update

N347

Downloads

Colour

Technical Data

last update: 21/10/2025
Description
Spotlight with clean lines designed for lay-on installation; particularly suitable for mounting on cornices, architraves and shelves. The centrally-located joint system ensures easy orientation in all directions. LED light source with passive cooling system. Extruded aluminium components body with die-cast aluminium end caps. Shaped fixing plate made of galvanised sheet steel. Die-cast aluminium optical assembly, joints and arms. PMMA emission optics - spot beam. Orientation capacity: -35°/+90° around the horizontal axis; 359° around the vertical axis. Optic screens with separate code are available for varying the light beam angle.
Dimensions
General (mm) 270x293x142
Diameter (mm) ø115
Technical performance
  • Class I

    Class I

  • Protected against the penetration of solids larger than 1 mm, not protected against penetration of liquids.

    Protected against the penetration of solids larger than 1 mm, not protected against penetration of liquids.

Complies with EN60598-1 and pertinent regulations

Physical properties
Material Aluminium and thermoplastic
Product certification
  • CE
    CE
  • ENEC-03
    ENEC-03

Photometric data

Details

lm system
1710.38
W system
22.5
lm source
1900
W source
18
Luminous efficiency - lm/W (system value)
76.02
lm in emergency mode
-
Light output ratio (LOR)
90
Optic and beam angle
S - Spot 14°
Adjustability
directional
Light colour quality
CRI (minimum) 80
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
50,000h - L80 - B10 (Ta 25°C)

Charts and polar curves

Electrical data

Voltage 220 - 240
ZVEI code LED
Power Supply Electronic Driver included
Mounting options Integral

Installation

Description

Besides the lay-on installation on horizontal surfaces, the luminaire can be installed on vertical walls and 180° upside down, ensuring optimal aiming in any situation. The fixing plate is anchored with screws and wall plugs, and the component body is then attached to it mechanically.;
Mounting Wall surface, Ceiling surface
Wiring Inclusive of electronic control gear incorporated into the component body; wiring to power supply on fixing plate through plug-in terminal block; configured for pass-through wiring with protective grommet.

Notes

The light emission can be varied by adding optional supplementary optics: medium - MXG3 (30° beam) flood - MXG4 (46° beam) oval - MXG5 (50° / 15°).
Subscribe