PB08
Colour
Technical Data
last update: 21/10/2025Description
Cover including emergency lighting kit for anti-panic areas (open area). Designed to clip onto Blade R body.
3 h autonomy with 12 h recharging time for maximum capacity.
Self-test function. Test function via button on front, accessible when product is installed.
Test function that can be activated via a Laser pointer.
Built-in red/green LEDs for indicating different device states.
Latest generation LiFePO4 (Lithium Iron Phosphate) 6.4 V 1.5 Ah battery.
Power in non-maintained mode: 0.52 W -
Centralised on/off command module available on request for 150 or 250 luminaires (for this function further cabling with 2 conductors is required)
Dimensions
Diameter (mm)
ø118
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Product certification
-
CE -
NOM -
QCERT
Photometric data
Details
lm system
220
W system
3.6
lm source
220
W source
3.6
Luminous efficiency - lm/W (system value)
61.11
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
0.44
Light output ratio (LOR)
100
Optic and beam angle
SM - Symmetric
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
5000 K
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic with inverter Control gear included
Mounting options
Integral
Installation
Description
Clips onto Blade R body Ø170 mm. The control electronics and batteries can pass through the body of the device even when it is installed.;
Mounting
Ceiling recessed
Wiring
Cabling option: non-maintained(SE), requires 2 conductors (N/L).
Cannot be used as a general lighting luminaire.