PB11
Colour
Technical Data
last update: 25/11/2025Description
Accessory for Blade R, complete with metal bracket for installing an integrated smoke detector at the centre of the luminaire.
For compatible models (Notifier, Esser, Honeywell) consult the updated list on our website or the instruction sheet.
Notifier
-Detectors NFXI-OPT; NFXI-OPT-BK;
-Bases B501AP; B501AP-BK
Esser
-Detector 802371;
-Base 805590;
Honeywell
-Detector TC806EIS1012
-Base B501AP;
Notifier
-Detectors NFXI-OPT; NFXI-OPT-BK;
-Bases B501AP; B501AP-BK
Esser
-Detector 802371;
-Base 805590;
Honeywell
-Detector TC806EIS1012
-Base B501AP;
Dimensions
Diameter (mm)
ø118
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.07
Material
Metal and technopolymer
Installation
Description
The Blade R and the base of the sensor are connected to the bracket using screws.
The plastic sealing cover snaps onto the body of the Blade R luminaire .
The minimal height required for the installation compartment is 200 mm.;
Mounting
Ceiling recessed
Wiring
For the smoke detector and its base, always adhere strictly to the manufacturer’s instructions and local standards.
The smoke detector and its base installation can be done together with the Blade R and PB11 accessory.
The smoke detector and its base can also be installed at a later time, taking care to install in advance the PB11 accessory and passing the cables necessary for the future installation of the detector.
The smoke detector and its base installation can be done together with the Blade R and PB11 accessory.
The smoke detector and its base can also be installed at a later time, taking care to install in advance the PB11 accessory and passing the cables necessary for the future installation of the detector.
Compatible products
This accessory can be used with the following products