PC67
Colour
Technical Data
last update: 09/01/2026Description
Phase cut 20 W dimmable power supply. Input Vin=220÷240 Vac 50÷60 Hz. Constant current output I=550 mA, SELV.
Accepts Trailing-edge (IGBT) and Leading-edge (Triac) type adjustment.
The type of dimmer that will be used must be tested by the customer to ensure it operates correctly with this driver. Contact iGuzzini for any further information.
Product features include overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
111x52x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.1
Product certification
-
EAC -
ENEC pending
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
Overvoltage protection
4kV Common mode & 2kV Differential mode
Inrush current
5 A / 50 µs
Frequency
50/60 Hz
Installation
Description
For recessed Laser Ø38 mm luminaires and remote installation, not compatible with the insertion drillhole (see the Laser instructions sheet).
Fitted with slots for fastening with screws, if required.;
Wiring
Input and output terminals on one side only (cable cross-section up to 1.5 mm2).
Cable clamp included for cables with a diameter of min. 3 mm - max. 8 mm.
Cable clamp included for cables with a diameter of min. 3 mm - max. 8 mm.
Notes
SELV, EL
Compatible products
This accessory can be used with the following products