PC92
Colour
Technical Data
last update: 25/11/2025Description
0/1-10V dimmable electronic power supply 20 W max. Input Vin=220÷240 Vac 50÷60 Hz for recessed Laser Ø96 mm luminaires. Constant current output 250÷900 mA selectable with a DIP-SWITCH.
Accepts 0-10V and 1-10V type adjustment. For connection with the control units, consider a sink current of 0.35 mA. For connection with potentiometers, consider a value of 100 kOhm. Product features include overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
108x52x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.1
Product certification
-
ENEC pending
Electrical data
Inrush current
5 A / 50 µs
Minimum dimming
1
Installation
Description
Compatible with the insertion drillhole for recessed Laser Ø96 mm luminaires. Fitted with slots for fastening with screws, if required.;
Wiring
The power supply is fitted with a cable and rapid connector to make the connection to the casing easier.
Input terminals for primary: cable cross-section up to 1.5 mm2).
Cable clamp on primary and secondary.
Notes
SELV
Compatible products
This accessory can be used with the following products