PD91
Colour
Technical Data
last update: 10/01/2026Description
0/1-10V dimmable electronic power supply 20 W, constant current output 350÷900 mA selectable with a DIP-SWITCH..
Input Vin=220÷240 Vac 50÷60Hz.
SELV output.
Accepts 0-10V and 1-10V type adjustment. For connection with the control units, consider a sink current of 0.35 mA. For connection with potentiometers, consider a value of 100 kOhm. The product features include common mode and differential mode overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Input Vin=220÷240 Vac 50÷60Hz.
SELV output.
Accepts 0-10V and 1-10V type adjustment. For connection with the control units, consider a sink current of 0.35 mA. For connection with potentiometers, consider a value of 100 kOhm. The product features include common mode and differential mode overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
111x52x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.1
Product certification
-
EAC -
ENEC pending
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
Overvoltage protection
4kV Common mode & 2kV Differential mode
Inrush current
5 A / 50 µs
Minimum dimming
1
Frequency
50/60 Hz
Installation
Description
Fitted with slots for fastening with screws, if required.;
Wiring
Input terminals for primary: cable cross-section up to 1.5 mm2).
Cable clamp on primary and secondary.
Notes
To set the current and for the minimum and maximum quantities of luminaires that can be connected to this power supply, consult the reference product instruction sheet. SELV
Compatible products
This accessory can be used with the following products